 |
VES System Sushi or Shabu-shabu Restaurant Conveyor System
Our Sushi and Shabu-shabu conveyor system crescent-chain is 114mm wide. The difference between a Sushi and a Shabu- shabu conveyor lies the speed of the conveyor. Normally, a sushi conveyor is equipped with a fixed speed between 6 and 7 m/min. A shabu-shabu conveyor is equipped with an adjustable speed from 6 to 10 m/min.
The main components of our system are:
1. Conveyor chain
2. Drive unit
3. Conveyor frame
4. Conveyor structure
|
|
Conveyor Chain
Our conveyor chain is made of PolyOxyMethylene, known as POM. The chain design has been tested by SIRIM to ensure the specs and feature meet the safety standards. A single gearmotor can drive a chain of up to 50 meters long. Any extension to the chain length of 50 meters will need an additional motor to drive it. A conveyor system of between 30 meters and 50 meters is sufficient for a busy restaurant.
The common problem with the sushi conveyor is the wear and tear of its moving parts. We can assure our customers that our conveyor chains will withstand tough usage. Should the conveyor chain and the wear-strip emit any white dust, we will rectify the problem without charge.
In a single-lane conveyor, the conveyor is driven at a 90 degree bend section. In a double-lane conveyor, the conveyor is driven at a 180 degree bend section. In a combination profile, the 180 degree bend section will be used to drive the chain, in order to pull a heavier load and get better performance. |
fg |
 |
The gearmotor mounted beneath the frame, pulls the conveyor chain. Although a 3-phase gearmotor could deliver more torque to drive the system, the power supply to your outlet is likely set at single phase. So, in order to use a 3-phase gearmotor in your outlet with single phase, a control panel with a general frequency inverter is required, but this is an expensive proposition.
As a means to reduce the cost of investment, we would like to introduce to our customers the Nissei single phase gearmotor, which is capable of pulling a 50-meter conveyor system. The standard unit comes with a fixed 6m/min speed. Customers can choose the optional variable speed control with a maximum speed up to 10m/min. Nissei Corporation is a well-known producer of small gearmotors in Japan.
|
|
|
Structure
The normal conveyor height is from 900mm to 1 meter from the floor level. At this height, the seated customer can conveniently reach for the food on the conveyor. Our conveyor structure system can be installed in 3 different methods, namely
1. on a concrete structure
2. on a steel structure
3. on an aluminium structure
The 2nd and 3rd methods could be dismantled and transported to new locations, or they could be
rearranged or modified as per new layout. On the completion of work, the structure is covered up with cladding to add beauty to the decoration of your outlet.
|
|
|
The Frame
The food business demands the highest level of cleanliness. The stainless steel conveyor frame makes cleaning it an easy task. At present, we offer 2 types of finishing – the mirror and the hairline.
We make 2 types of frame size – large and medium. What is the suitable frame size for your outlet? How many seats should there be along the conveyor? We at VES System are ready to help you find the best answers to these questions and much more. |
fg |
 |
|
|
Layout Design
We give below the most favourable layouts of sushi conveyor to help you make your choice. However, we would like you to know that we will be pleased to suggest a customized layout to suit your outlet. Please contact us if you need more information on this.
|
 |
|
| |
|
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
